V2 Z33 350z/Z34 370z gearbox cross member for S-Chassis Slave Cylinder The gearbox cross member has

The gearbox cross member has been designed to use an OEM S13/S14 gearbox mount such as our polyurethane/ solid mount that we also make

What Is Bump Steer

These are NOT a direct fit without re drilling

by using stackable shims it allows you to further increase adjustment by + or -1 degree of caster

You may need to trim the shaft down around 3-4mm's if it is touching

V2 Z33 350z/Z34 370z gearbox cross member for S-Chassis Slave Cylinder The gearbox cross member hasThe V2 GKTECH Z33 350Z Z34 370z gearbox cross member has been designed as a bolt on solution when fitting these gearboxes to an S chassis when running either an SR20 KA24 motor. The gearbox cross member has been designed to use an OEM S13 S14 gearbox mount such as our polyurethane solid mount that we also make, seen here; Solid S13 S14 S15 R32 GTS T SKYLINE BILLET ALUMINIUM SOLID GEARBOX MOUNT Polyurethane V2 POLYURETHANE GEARBOX MOUNT 6mm steel