RCWL-0516 Microwave Radar Sensor Module Human Body Switch Induction Module 2K5 sometimes known as solder suckers

sometimes known as solder suckers

Normally Open (NO)

Measure the output of the load cell with no force on it and note the mv/V output measured by the PhidgetBridge

The 1E SMD Resistor is a conventional thick film chip resistor and is a type of surface-mount resistor

It is a 6 Pin DPDT Self-Lock lock Push Switch each input has two corresponding outputs to which it may be connected

RCWL-0516 Microwave Radar Sensor Module Human Body Switch Induction Module 2K5 sometimes known as solder suckersThe RCWL 0516 Microwave Radar Sensor module can be used as an alternative to the common PIR motion sensor. It is widely used in burglar alarms and security lights. unlike the PIR sensor, this sensor instead of sniffing the blackbody radiation from a moving person, it uses a microwave Doppler radar technique to detect moving objects. It has a detection range of 5~9 meters. When triggered, its TTL level output (OUT) pin will switch from LOW (0 V) to