Z34 370Z car specific handbrake Interior Misc NOTE: Will NOT fit with

NOTE: Will NOT fit with HICAS system still installed or with the use of a HICAS lock bar

S13/180sx Roll center correction kit balljoint shankwhich includes the top nut

com/v2-axle-spacers-5mm-10mm-or-15mm

The GKTECH high tensile 4130 zinc coated offset tie rod extenders screw on to the end of either standard or aftermarket tie rods and allow the tie rods to travel further into the steering rack which creates more steering lock with the added bonus of moving the tie rod position forward 25mm's which helps reduce steering bind

- Ability to run drum brake in standard position with dual calipers(or single caliper) installed

Z34 370Z car specific handbrake Interior Misc NOTE: Will NOT fit withWhen installing a hydraulic handbrake in your car, you'd typically have to drill holes or weld a bracket in place. We understand that not everyone wants to do that, so we've made these bolt in brackets. The brackets bolt to the stock gearbox shifter hole and allows you to fit our hydraulic handbrake assembly without modifications to the gearbox tunnel. 100% direct fit with no modifications required to the gearbox tunnel Available for either center