MG Chemicals 8332-25ML Super Strength Fast Set Epoxy, 25 mL Dual Dispenser – 5000 PSI Non-Conductive 2-Part Adhesive It features a hinged lid

It features a hinged lid that protects the glass housing when not in use

With this kit and your own Arduino module

Own your very own “shuttle” with the ESTES Shuttle

Includes PC software: Easypower

Temperature readings are stored in memory and up to 32 values are retained

MG Chemicals 8332-25ML Super Strength Fast Set Epoxy, 25 mL Dual Dispenser – 5000 PSI Non-Conductive 2-Part Adhesive It features a hinged lidQuick set epoxy glue Set time: 8 to 10 minutes Cure time: 5 hours at room temperature or 15 minutes at 65 C 1: 1 mix ratio Tensile strength of 5,000 psi Low shrinkage Provides strong electrical insulation Protects against thermal and mechanical shocks Strong resistance to humidity, salt water, acids, bases, and aliphatic hydrocarbons Fast Set Epoxy is a 2 part, 1 to 1 epoxy adhesive with a five minute working time. Bonded parts need only be held