Gear Pinion Helical - 30T, Modula 1.0 - 14mm Bore Hole ZAK leads to better over all

leads to better over all precision and strength for your builds

0mm and 14

1set FK12/FF12 (End Support)

Key Features:

not need to externally connect current-limit resistor

Gear Pinion Helical - 30T, Modula 1.0 - 14mm Bore Hole ZAK leads to better over allPrecision CNC gear pinion for the racks. They are helical tooth made out of ground steel, and pre drilled for 2 set screws at 90 degrees and hardened. The pinion specs are: Bore Hole 14. 0mm Modula 1. 0 Helical Tooth Hardened Ground C45 Steel Pre drilled Bore Hole (Please select the correct bore hole required) 20 Degree Pressure Angle 2 Set Screws at 90 degree OD = 32mm Flange OD = 20mm Total Width = 25mm Teeth Width = 15mm