Amplified GPS Antenna Splitter | 4 Outputs, 1 Input, SMA Connectors 272N06X04 This O-ring gasket is used

This O-ring gasket is used with the Kannad 406 battery kit

This model is rear mounted and clock mounted

gives a faster grasp of an aircraft's overall situation

ASA’s Test Guides are the aviation mechanic’s best resource for successful test-taking

B&B 5151-B is a viscous liquid compound for removing high and low VOC polysulfide primers and sealants from metallic aircraft surfaces

Amplified GPS Antenna Splitter | 4 Outputs, 1 Input, SMA Connectors 272N06X04 This O-ring gasket is usedThe ALDCBS1X4 GPS amplified splitter has one input and four outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. Each RF output (J2 J4)