19 thread Standard Wire with eye terminal, ø14 mm, Length 20,4 m, Furlex 400S/E/TD ø11 mm Clevis Pin 2:1 halyard block for Seldén

2:1 halyard block for Seldén CX45

allowing accurate rig adjustments in line with Seldén's guidelines

a plastic washer which is placed between block body and shackle

Features low friction

Max RM MH: 340 kNm

19 thread Standard Wire with eye terminal, ø14 mm, Length 20,4 m, Furlex 400S/E/TD ø11 mm Clevis Pin 2:1 halyard block for SeldénThe original wire for Furlex 400S E and TD. 1x19 strands, AISI 316 stainless steel. The purpose of the plastic tube at the top end is to center the wire in the luff extrusion and prevent chafe between wire and top extrusion. This bearing is permanently fixed with a talurit. The newer Furlex models, of the 4th generation, has a purpose made top guard and do not need the roller. Our recommendation is that the forestay wire is replaced after 20000