panblast moisture separator 13mm bundle Make sure your Contracor CAF-3

Make sure your Contracor CAF-3 Moisture Separator always performs at its best with these genuine (OEM) spare parts

This precision nickel comparator plate conforms to International Standard ISO 8503 for grit and shot blast surface roughness comparison measurement

The water and air atomisation takes place in the nozzle outlet

Temperature range: -40° to +90 °C

MEX-E-1 MEX-E-2 Maximum working pressure (bar) 12 12 Vessel volume (litre) 150 250 Capacity (m³/min) 20 30 Voltage (Volt) 380~ /50 Hz 380~ /50 Hz Power (kW) 0

panblast moisture separator 13mm bundle Make sure your Contracor CAF-3PanBlast moisture separators remove excess moisture from the compressed air supply to the blast pot. This reduces clogging from wet blast media and prevents moisture from entering the blast stream. Features Different sizes available, compatible with most blast pots Replaceable, 40 micron sintered bronze filter sleeves Manual drain allows you to empty the separator as needed PanBlast Moisture Separators are available with the following connection