BLOCK HEATER BH-200-2 130ºC ANALOGUE 230V 50HZ A.C. Weighing Bottles Duran® can be cooled down

Duran® can be cooled down to the maximum possible negative temperature and is therefore suitable for use with liquid nitrogen (at approximately – 196°C)

perforated sampling head which holds either 60mm diameter contact plates or 90mm diameter petri dishes

with large

Automatic self calibration triggered by ambient temperature change beyond set limits

external dimensions: 580 x 335 x 330mm L  x  W  x  D

BLOCK HEATER BH-200-2 130ºC ANALOGUE 230V 50HZ A.C. Weighing Bottles Duran® can be cooled downCole Parmer BH 200 2 block thermostat For controlled, dry heating of test tubes, microplates and Eppendorf tubes in aluminium blocks. Range ambient +8C to +130C Analogue dial setting Hot warning light illuminates whenever block temperature exceeds 70C even when unit is switched off (but remains connected to the mains supply socket) Heat to 100C in less than twelve minutes General specifications: Model BH 200 2 Control Analogue Temperature range x