Halyard Lead, Double - For rope halyards (not wire) C405/F406 Turnbuckle The complete 400S/500S sparepart list

The complete 400S/500S sparepart list is available on our website

The block includes a becket for additional rigging options

though the safe working load and breaking load of the top set are reduced by 50%

This is a 15 mm wide and 300 mm long pin stop track with holes for M5 fasteners

Desc: 2x9000 mm

Halyard Lead, Double - For rope halyards (not wire) C405/F406 Turnbuckle The complete 400S/500S sparepart listDouble halyard lead fitting in electro polished stainless steel for routing of two rope halyards. The fitting is slightly angled to achieve a perfect alignment. In order to prevent galvanic corrosion between stainless and aluminium, the fitting shall be lacquered on the inside to insulate it from the mast. Any other kind of insulation, such as a thin plastic layer, will do just as well. Use only for rope halyards (not wire). M10 screws included.