H_Ratchet SGL 36T Freehub | Shimano/SRAM HG Splined Type:Shimano/SRAM HG Splined Both Aerodynamicist rim profiles were

Both Aerodynamicist rim profiles were wind-tunnel developed and tested to offer low drag and crosswind stability

\n\n31mm internally reinforced

Pair of replacement front axle end caps for Engage RB hubs

He suffered no punctures over the duration of the race and upon removing the tyres after the race there was still plenty of free flowing latex inside the tyre

we took a single final prototype shape of each depth to the wind tunnel (compared to the 5 and then 3 for the Limitless project)

H_Ratchet SGL 36T Freehub | Shimano/SRAM HG Splined Type:Shimano/SRAM HG Splined Both Aerodynamicist rim profiles wereReplacement freehub for H_Ratchet SGL 36T hubs. For an expanded view of the freehub, which shows it's individual parts, please see the image gallery. Note: Not all parts of the freehub seen in the expanded view are available to purchase separately. Freehub bearings from left (hub side) to right (end cap side): 6802 2RS Bearing Stainless Steel 15267 2RS Bearing Stainless Steel