19 thread Standard Wire with eye terminal, ø10 mm, Length 17,9 m, Furlex 300S/E/TD Split Pin It features stainless steel ball

It features stainless steel ball bearings for high strength under dynamic loads

End controls 443-112-02 / 443-112-03 with Size 38 mm cam cleats

B-MIN: 106 mm

the halyard load must be higher than what normal halyard boxes and stoppers can handle

The becket has a detachable pin for a spliced eye

19 thread Standard Wire with eye terminal, ø10 mm, Length 17,9 m, Furlex 300S/E/TD Split Pin It features stainless steel ballThe original wire for Furlex 300S E and TD. 1x19 strands, AISI 316 stainless steel. The purpose of the plastic tube at the top end is to center the wire in the luff extrusion and prevent chafe between wire and top extrusion. This bearing is permanently fixed with a talurit. The newer Furlex models, of the 4th generation, has a purpose made top guard and do not need the roller. Our recommendation is that the forestay wire is replaced after 20000