PUMP-1 ESP32-C6 Watering Kit Ecosystem_STEMMA The regulator output is available

The regulator output is available on the VDD pin and can supply up to a few hundred milliamps to external devices

Product number: Seeed 101020252

it’s recommended to use the Chip as a marker on the paper’s edge where the copper tape should go

sound level detection Temperature-Humidity Sensor DHT11 temperature and humidity sensor Ambient temperature and humidity detection Tilt Sensor Detects shake signal Shake detection

The Getting started with the Arduino Leonardo page contains all the information you need to configure your board

PUMP-1 ESP32-C6 Watering Kit Ecosystem_STEMMA The regulator output is availableThe Apollo Automation PUMP 1 Kit is a versatile, compact, and food safe ESP32 C6 based fluid pump kit designed to integrate with our PLT 1 plant sensor to automate your watering needs. It features two ports for fluid sensors that detect water presence, allowing the pump to automatically stop when watering is complete or if your water bottle runs empty, protecting your system from damage. Perfect for smart indoor home gardeners, the PUMP 1 takes the