Z33 350z/V35 Steering rack relocation kit #5100-20mm NOTE: The 20mm shank with

NOTE: The 20mm shank with use of non RC corrected knuckles leaves very little clearance from the rotor to ball joint housing

1/2"-20 LH Thread (Rod End) - 38

GTRX-TRODZ33X-TRODZ34X-TROD

The V2 CD009 Gearbox shifter relocation setup has been designed as a bolt on a solution when fitting cd009

so no modification is required

Z33 350z/V35 Steering rack relocation kit #5100-20mm NOTE: The 20mm shank withIn a drift application when high steering angles are required, the steering link and knuckle position can align, making steering very difficult. This is known as steering bind or over centering and the best solution is to move forward the inboard mount on the steering rack. This can be achieved with offset rack spacers, however, by creating this offset, a bending moment is applied to the steering rack. This over time leads to the deterioration of the