General Motors GM-52012 Stator Alignment Pins Shop by Category > Hand Tools>Hex/Torx/Allen With Engineered plastic jacket and

With Engineered plastic jacket and 3/4" fine threads

ensuring longevity and a secure fit

Drill America DMS73-5009 9/16" X 30" Long Auger Bit

Used to reset the electromechanical parking brake and for turing/compressing the rear brake caliper piston on BMW chassis E89

the J & J U-Joint Puller 4LIFE was used to remove and reassemble a Spicer Life Series U-Joint that had been heavily rusted in salt water and corroded with Arizona dust

General Motors GM-52012 Stator Alignment Pins Shop by Category > Hand Tools>Hex/Torx/Allen With Engineered plastic jacket andGeneral Motors GM 52012 Stator Alignment Pins Kent Moore Tool Number: DT 52012 Applications: 2017 Chevrolet Bolt EV The GM 52012 Stator Alignment Pins are a set of three precision engineered pins used during unit repair to guide, protect, and align the stator in the correct position for the removal and installation of the Bolt EV 1ET25 transmissions permanent magnet rotor. These pins work in conjunction with the GM 52011 Rotor Remover Installer, which