GM 6640 Strut Rod Nut Socket 18mm Shop by Category > Fuel System & Ignition>Disconnect Tools All wrenches are forged from

All wrenches are forged from 1″ alloy steel for long lasting strength

These clips lock the secondary cam chain tensioners in the compressed position while servicing the cam chains

2x adapter 10-222A/2

8v Series 71 Detroit)

Use to install the king pin seal ring DANA axle

GM 6640 Strut Rod Nut Socket 18mm Shop by Category > Fuel System & Ignition>Disconnect Tools All wrenches are forged fromGM 6640 Strut Rod Nut Socket 18mm Kent Moore Tool Number: CH 50732 A GM Number: 50732 A For use on shock absorbers that have the electrical terminals coming through the center of the tenion and the mounting nut deep into the top mount. A typical socket cannot be used in this application. The tenion must be held with a 9mm open end wrench. This design will make the repair easier. This tool will also work with Passive Absorbers. Hex Size: 18 mm. 1 2"