Self-Test Card for MEGA-IO [Discontinued] _ARD_SHIELD_LED 5 mm if you remove

5 mm if you remove the strip from the casing

we try hard to get consistent wiring between batch of strip but we can't guarantee it

2 Kg*cm holding torque per phase

Please note that you can only use one Serial Pi board on a Raspberry Pi

5 Amp peak

Self-Test Card for MEGA-IO [Discontinued] _ARD_SHIELD_LED 5 mm if you removeSequent Microsystems Self Test Card for the Mega IO enables loop back card for testing all I O's of the MEGA IO card. The Self Test card allows users to check the Mega IO card from the command line and assists with debugging and isolating faults. For any technical questions about this product please email support@sequentmicrosystems. com Technical Specification 40 pin header pin compatible with MEGA IO only Loops Open Collector Outputs to Opto