Solid Carbide Spektra™ Extreme Tool Life Coated Spiral Plunge 5mm (.1969") Diameter x 3/4 x 1/4 Inch Shank ch-3/4" The Drilling Guide also automatically

The Drilling Guide also automatically centers on the edge of 3/4"-wide and 1/2"-wide boards and plywood

The Crosscut Station is even compact enough to make it a portable cutting solution when you need accurate crosscuts and angle cuts on the go

Plus extra features such as an Air Control Valve and a High-Efficiency Air-cap for even less over spray

Rip Guides also eliminate the hassle and potential inaccuracies of measuring and marking every cut

and can be easily removed without needing to be re-calibrated or adjusted for accurate measurements every time

Solid Carbide Spektra™ Extreme Tool Life Coated Spiral Plunge 5mm (.1969") Diameter x 3/4 x 1/4 Inch Shank ch-3/4" The Drilling Guide also automaticallyDirection: Down Cut (D) Diameter: 5mm (. 1969") (B) Cutting Height: 3 4" (d) Shank: 1 4" (L) Overall Length: 2 1 2" Flutes: 2 Overview Spiral flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean accurate cut while the augering action clears chips from the cut. The Down Cut cuts from the surface down leaving a smooth edge at the surface. Special unique carbide grade