12" eTape Liquid Level Sensor + extras _ARD_SHIELD_SERIAL As of December 28

As of December 28

Advanced Configuration

The input of these adapters is 1/2" NPT aka National Pipe Thread (tapered) and the output is 1/2" BSPP aka British Standard Parallel Pipe (non-tapered)

and there is a caret that indicates where we suggest you make the cut

This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed

12" eTape Liquid Level Sensor + extras _ARD_SHIELD_SERIAL As of December 28The eTape Liquid Level Sensor is a solid state sensor with a resistive output that varies with the level of the fluid. It does away with clunky mechanical floats, and easily interfaces with electronic control systems. The eTape sensor's envelope is compressed by the hydrostatic pressure of the fluid in which it is immersed. This results in a change in resistance that corresponds to the distance from the top of the sensor to the surface of the fluid.