Motor Attachment Coupling tuner upgrade Select which Grip you want

Select which Grip you want to use with your turner and we will make sure you get the correct fittings needed for this Turner which will be a 3/4" PVC with Slip on Coupler Only

let it tumble inside freely and at your 5 minute mark stop the machine and remove your bubble free resin and get your craft on :)

If you need extra pen clips

This is ONLY for Grips that are used with Turners purchased from us

We strive on making products to help the Crafter Save time and money and with this mixer you can save both

Motor Attachment Coupling tuner upgrade Select which Grip you wantThis is used to attach to the motor shaft on Turners. The motor shaft must be 7mm or smaller. If you don't have a Digital Caliper to measure the diameter of your motor shaft, a Mc Donald's Straw is exactly 7mm inside so if you slide the straw over the motor shaft and it is a snug fit then your motor has a 7mm shaft. Attaching these to motors is easy. Loosen the 2 black set screws with the provided allen wrench, slide it over the shaft of the motor and