Tillman JDG10631 John Deere 9.0L Servicegard Injector Sleeve Puller Alt. Shop By Category > Kukko Tools > Separators & Pulling Devices>Hydraulic Pulling Devices Kukko 133-65 65mm Open-end Slogging

Kukko 133-65 65mm Open-end Slogging Spanners (DIN 133)

OTC 1046 Long 3 Jaw 17-1/2 Ton Grip-O-Matic Mechanical Puller

Wide striking head directly transfers force to cut thick seals

Ajax 903-1 Turn Type Shank Ball Joint & Tie Rod Separator Chisel

pump-hydraulic nut splitter

Tillman JDG10631 John Deere 9.0L Servicegard Injector Sleeve Puller Alt. Shop By Category > Kukko Tools > Separators & Pulling Devices>Hydraulic Pulling Devices Kukko 133-65 65mm Open-end SloggingTillman JDG10631 John Deere 9. 0L Servicegard Injector Sleeve Puller Alt. Used to remove an existing electronic injector sleeve from the cylinder of the 9. 0L diesel engine. Install the compression screw into the injector bushing. When installing the tool, the tool extender section must Securely positioned on bushing ID. Use a support wrench to hold the upper part of the compression screw and tighten the lower part of the screw at the same time.