CIOKS CRUX 24 inch Y-splitter cable The people from EQD revisited

The people from EQD revisited another classic forgotten pedal

but at the same time reassures us that DIY is the way to go

The circuit starts as two gain stages running into each other with an input gain control and a sag on the second stage (bias)

but replacing the germanium transistors with a set of Silicon transistors for cleaner cleans

The octave fuzz and ring modulator in Crystal Sword work from their own dedicated analog circuit boards

CIOKS CRUX 24 inch Y-splitter cable The people from EQD revisitedCIOKS CRUX is the ultimate add on to CIOKS DC7 if you are using a Neural DSP Quad Cortex, a Line 6 HX series pedal or another power hungry 9V or 12V multi effects pedal. Simply connect the CRUX to the 24V outlet on DC7, set the correct voltage on CRUX, connect the appropriate CIOKS Flex cable from CRUX to your multi effect pedal and you are good to go. Using CRUX frees up the outlets on DC7 that would otherwise be needed to run these devices (for