Sola-Prod MPPT Solar Charge Controller 12/24V 30A Batteries Lens: 4mm@ F1

Lens:  4mm@ F1

Blue or Green)

up to 75 hours of power for a transponder and a transmitter Supported battery type 12 V battery with a full charge cycle of up to 30 hours Maximum battery size fitted in casing 150 mm × 64 mm × 94 mm Recommended battery type 12 V battery with a capacity of 7Ah/7

3 seconds Maximum connected devices (in a system with one range extender) Hub 2 — up to 99 Hub 2 Plus — up to 199 Number of range extenders connected to the hub 5 Operating system OS Malevich Power supply 110−240 VAC or 12 V from 12V PSU for Hub 2/Hub 2 Plus/ReX 2 Built-in backup battery Li-Ion 2 Ah (Up to 38 hours of battery life when Ethernet is disabled

The Console can switch on the operator light for periods of 3 minutes at a time or completely lock out all programmed remotes until deactivated

Sola-Prod MPPT Solar Charge Controller 12/24V 30A Batteries Lens: 4mm@ F1The Sola Prod MPPT charge controller 30A is based on advanced MPPT(Maximum Power Point Tracking) control algorithm, with an LCD display to monitor the running status. The MPPT control algorithm can minimize the maximum power point loss rate and loss time, quickly track the maximum power point of the PV array and obtain the maximum energy from solar modules under any condition and can increase the ratio of energy utilization in the solar system by 20